Search our inventory of drains, drain parts, safety and roofing equipment, and accessories. Shop Now.

5 Steps To Calculate Total Roof Drains Needed

Step by Step Instructions

There are 5 easy steps to figure out how many drains your commercial roofing project will need.

Step 1: Calculate total roof area

Calculate the total roof area by multiplying its length by width. Example: A 200 ft. x 250 ft. = 50,000 sq. ft. area.

Determine leader or pipe size. Following are the standard sizes for some of the top manufacturers:

• Zurn: 2, 3, 4, 5, 6, and 8 in.
• Josam: 2, 3, 4, 5, 6 and 8 in.
• Wade: 2, 3, 4 and 6 in.
• Smith: 2, 3, 4, 5, 6 and 8 in.

Step 3: Find rainfall rate

Find the rainfall rate for the building’s location. The most accurate and up-to-date resource for rainfall rates is going to be your local codes.

However, there are resources like the International Code Council that list the rainfall rates for larger cities in all 50 states. This should be used only as a general reference.

Step 4: Find the area handled by one drain

Using the chart below, find the total square footage one drain can handle based on hourly rainfall rate.

Hourly Rainfall (in.)

 Leader / Pipe Size (in.) Hourly Rainfall (in.) 1 1.5 2 2.5 3 4 5 6 7 8 Total Sq. Ft. Covered Per Drain 2 2,880 1,920 1,440 1,150 960 720 575 480 410 360 3 8,800 5,860 4,400 3,520 2,930 2,200 1,760 1,470 1,260 1,100 4 18,400 12,700 9,200 7,360 6,130 4,600 3,680 3,070 2,630 2,300 5 34,600 23,050 17,300 13,840 11,530 8,650 6,920 5,765 4,945 4,325 6 54,000 36,000 27,000 21,600 18,000 13,500 10,800 9,000 7,715 6,750 8 116,000 77,400 58,000 46,400 38,660 29,000 23,200 19,315 16,570 14,500

This table is based on Zurn's Roof Drain Vertical Requirement for Horizontal Roof Areas at Various Rainfall Rates table. The above sizing data is offered as a guide only.

Step 5: Calculate drains needed

Take the roof’s total square footage and divide by the total square footage handled by one drain. The result is the number of drains needed.

For example: 50,000 / 4,400 = 11.36; or 12 drains required.

Have a Drain Question?

Have a question or in need of a specific roofing product or drain part? We have the resources to help you.

Reach out to the Drain Wizard.

Related Posts

Aug 15, 2022
How To Purchase A Replacement Flat Roof Drain
Flat roof drains are often subjected to heavy weathering and regular wear and tear. As a result, their parts—including domes, rings, sump pans, and clamps—sometimes break, crack or rust over time,...
Aug 15, 2022
Pros and Cons of 3 Flat-Roofing Systems
There are 3 main types of flat-roofing systems: built-up roof (BUR), modified bitumen and single-ply. Each system is designed to waterproof the roof and protect it from sun, rain, snow and more. This...
Aug 15, 2022
What Is A Retrofit Drain And How To Install One
When reroofing or removing an existing drain, a replacement drain needed. This is where retrofit drains are used, as they replace the broken or corroded roof drains easily with almost no...

Find more resources

Whether you’re in search of roof drain specifications, product catalog, or anything in between, we have the resources to answer your questions.